Post by j7oyun55rruk on Jan 4, 2024 8:06:15 GMT
Even in northern climates in Siberia and the Far East. Thermal installations with geothermal heat pumps can be used commercially, industrially, privately for heating schools, kindergartens, residential buildings. Geothermal energy can be extracted using geothermal power plants and geothermal heat pump units. There are two types of geothermal installations. The former uses hot springs (geysers, volcanoes) with temperatures between 1 and 2. The second is a device that utilizes geothermal heat.
About half of use dry steam deposits from geothermal groundwater. But there are C Level Contact List very few of them, and almost all of them are located with geysers and thermal springs: there are few such places in Russia Kamchatka Peninsula, Western Siberia (Omsk, Novosibirsk region), Dagestan. The availability and attractiveness of this energy source is certainly very high: a clean, free and inexhaustible source of heat sounds like the fantastic predictions of the boldest futurists.
Geothermal power plants use the method of extracting heat directly from groundwater. It's simple: pump water through pipes laid in wells. Through these pipes, the water is heated and turned into steam under pressure, and the steam falls on the blades of the steam turbine equipment at the surface outlet and makes them spin. At the same time, electricity is generated, and the steam turns into water again, which enters the ground for heating, and so on.
About half of use dry steam deposits from geothermal groundwater. But there are C Level Contact List very few of them, and almost all of them are located with geysers and thermal springs: there are few such places in Russia Kamchatka Peninsula, Western Siberia (Omsk, Novosibirsk region), Dagestan. The availability and attractiveness of this energy source is certainly very high: a clean, free and inexhaustible source of heat sounds like the fantastic predictions of the boldest futurists.
Geothermal power plants use the method of extracting heat directly from groundwater. It's simple: pump water through pipes laid in wells. Through these pipes, the water is heated and turned into steam under pressure, and the steam falls on the blades of the steam turbine equipment at the surface outlet and makes them spin. At the same time, electricity is generated, and the steam turns into water again, which enters the ground for heating, and so on.